Backup Aborted-Macrium unable to back up disk

  1.    2 Days Ago #1

    Backup Aborted-Macrium unable to back up disk


    After working fine for several months, Macrium Reflect Free is unable to back up my 4tb data drive. I have run disk check from the command line, run Western Digital Lifeguard diagnostics, Crucial diagnostics, still no luck. No problems with windows or third party software reading and writing to the drive, only Macrium has the problem. Plenty of free space on the target drive. The backup runs to about 98% complete, then aborts and shows an error pop-up. Any ideas?

    The error message from the log file reads:

    Backup aborted! - Unable to read
    from disk - Error Code 23 - Data error (cyclic redundancy
    check).

    Windows 10 Pro
    Intel Core i5
    16 GB Ram
    225 GB Crucial SSD System drive
    4 TB Western Digital Black Data drive
    8 TB Western Digital MyBook USB Back-up drive
    On Board intel Graphics


    davwilli
      My ComputerSystem Spec

  2.    2 Days Ago #2

    Backup aborted! - Unable to read
    from disk - Error Code 23 - Data error (cyclic redundancy
    check).

    This suggests your disk may be failing. Try Hard Disk Sentinel (trial) - best for an instant comprehensible short report on its GUI.

    Else anything that checks SMART parameters. E.g. HD Tune, Crystal Diskinfo.

    Note: such utilities often perform background disk monitoring - ideal for notifying you of degraded disks.

    Google could have interpreted this:
    Click image for larger version. 

Name:	1.jpg 
Views:	1 
Size:	99.8 KB 
ID:	216490

      My ComputerSystem Spec

  3.    2 Days Ago #3

    Yes I read that article on Macrium's site, and followed thier suggestions. As I stated in my post, I have run several disk diagnostics, all show no prblems, specifically the Smart Data is clean.
      My ComputerSystem Spec

  4.    2 Days Ago #4

    Good- now please try
    a. a surface scan using one of those tools.
    b. Hard Disk Sentinel (trial).
      My ComputerSystem Spec

  5.    2 Days Ago #5

    Ok, I should have been more specific. The Macrium web site recommends a surface scan with CheckDisk, the Microsft utility built in to Windows, which I did and found no bad sectors. I think I will go back to AOMEI Backupper, it reads the disk with no problem, just very slow and resource hog. Thanks for your help.

    David
      My ComputerSystem Spec

  6.    2 Days Ago #6

    Test your disk as I've described.... You do not want to continue with a possibly defective disk. You should make sure you don't.

    You came to this forum for advice- if you ignore it, there's little point...

    Chkdsk does not check the whole disk, and Macrium clearly detected a problem. It is a more robust program than Aomei Backupper (I've used both).
      My ComputerSystem Spec

  7.    2 Days Ago #7

    CheckDisk run from the command line with the proper parameters i.e.; /f /r /x, does check every cluster on the drive. There are many disk utilities available, they don't do anything CheckDisk can't do except provide user friendly GUI.

    edit:
    I agree that Macrium is the better application, it seems to be incompatible with something installed on my system, I hoped someone might have encountered and solved the same issue. The only advice you have given me is what is easily found by searching the internet. Again, thanks for your advice.
      My ComputerSystem Spec

  8. storageman's Avatar
    Posts : 481
    Windows 10 Pro 1809 17763.134
       2 Days Ago #8

    At least run the WD diagnostic "Data Lifeguard" against that disk. If its still under warranty, Western Digital will require you to provide a Data Lifeguard report. Run the surface check.
      My ComputersSystem Spec

  9.    2 Days Ago #9

    I ran the surface checkwith Data Lifeguard, no bad clusters found. There is nothing wrong with the drive, for some reason Macrium has the problem. If Windows can read the drive, and reports no bad clusters, Macrium would have to be running in its own envoirnment to find something Windows can't.
      My ComputerSystem Spec


 

Related Threads
Hi all. I've on the advice of this forum installed Macrium Free for disc imaging (it feels like a really well put together application) to provide an additional backup for my writing, but would appreciate some help with a few questions from...
A couple of days ago, I booted up my PC, which has an SSD OS C drive and a conventional D drive for data storage, and the boot failed. So, I booted into Windows RE/Troubleshooting. "Reset this PC" was not available. In "Advanced options", "Startup...
I have the latest version of Macrium Reflect Free and have used it successfully create Full and Differential backups but i removed the external usb hdd to do a backup on another pc recently and when the scheduled backup tried to run it had no...
I see two choices are available in creating rescue media... Which choice is better? If I create the rescue media on the backup drive which has the system partirion and the data partition do I need to also make the DVD rescue disk too?
I'm setting up a file backup on Win 10 Pro. Under the backup settings there is the "Back up these folders" section. I have a total of five folders I want to backup so I keep removing all the folders that Windows adds by default and leave the five...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:52.
Find Us