Looking at a new 2K monitor

Page 2 of 2 FirstFirst 12
  1. jimbo45's Avatar
    Posts : 6,381
    Windows / Linux : Centos, Ubuntu, OpenSuse
       18 Dec 2018 #11

    Hi there
    Remember also that if you have too large a screen you will have to sit further away from it. Personally for up to 32 inch screen it really doesn't pay to get a resolution better than 1920 X 1080 (full HD). Any higher resolution is only marginal at typical viewing distances.

    Of course Ultra 4K UHD is magnificent on a 50 - 60 inch screen but you'll need to position the screen some way from in front your nose !!!! .

    Problem also with these types of screens is in the way some programmers have coded the software -- with fixed pixel sizes you'll find some menus etc have really tiny fonts and you can't increase the font sizes. Personally I think programmers who code like that should be left to stay for 3 days in a cold meat store room stark naked !!!!

    Most video cards can drive quite large monitors as it's only the video signals from the graphics that are necessary -- the power for the rest of the electronics required to produce video on the screen comes from the electronics within the monitor / TV itself.

    For example I've no problem with standard HDMI output at 1920 X 1080 from an HP envy laptop driving a 42 inch screen at 1920 X 1080 -- and that's just using the basic laptop's built in video. Any bigger than 42 inch would need me having to do a massive amount of desk re-arranging !!!!!!

    Cheers
    jimbo
      My ComputerSystem Spec

  2.    4 Weeks Ago #12

    bobkn said: View Post
    The 1050ti is spec'd to run up to 7680x4320 (8k) and 240 Hz refresh rate, although obviously not at the same time. I think that the card is capable of running at the maximums currently supported by DisplayPort 1.4 and HDMI 2.0b.

    I believe that as long as you're not contemplating high resolution game play, the 1050ti should support a 4k or 2k monitor without any issues.

    I'm using a Samsung U28D590D 28" 3820X2160 display. It was one of the earliest relatively inexpensive UHD monitors that supported a 60 Hz refresh rate. (It's only a TN panel, though.) I use the DisplayPort interface. My graphics card is a Maxwell Titan X, which is about the same as a GTX 980ti. (Don't ask why I own such a ridiculous card.) I can't speak to the effectiveness of the 1050ti, but I have never seen a graphics card that gave poor results with static images at any supported resolution.
    AFAICS, the Geforce GTX 1050, non-Ti, supports UHDTV resolution over HDMI inteface...

    My"better half" wanted more "screenestate" and update the 32" BenQ with 2,560 x 1,440 resolution" for something larger. The PC monitors were out of my price range, so added a 40" Samsung UHDTV (3,840 x 2,160) instead at the fraction of the cost. It works just fine in PC mode with minor adjustments...
      My ComputerSystem Spec

  3. bobkn's Avatar
    Posts : 1,996
    Win 10 X64 Pro 1809 17763.55
       4 Weeks Ago #13

    Cr00zng said: View Post
    AFAICS, the Geforce GTX 1050, non-Ti, supports UHDTV resolution over HDMI inteface...

    (snip)
    I didn't mean to imply that you can't get UHD through an HDMI interface. The monitor must support HDMI 2.0. Mine does not; only 30 FPS over HDMI. (60 FPS though DisplayPort.) The U28D590D is old tech, on the market for about two years.
      My ComputersSystem Spec

  4. ICIT2LOL's Avatar
    Posts : 1,132
    7 and 10 on various machines
    Thread Starter
       1 Week Ago #14

    Just want a few thoughts on this one
    Samsung UE590 U28E590D 27" 28" LED LCD Gaming Monitor 1MS 4K UHD HDMI FreeSync
    I know it is a TN panel but at $400 down from close to a$1000 I thought it was a good buy.

      My ComputerSystem Spec

  5. bobkn's Avatar
    Posts : 1,996
    Win 10 X64 Pro 1809 17763.55
       1 Week Ago #15

    ICIT2LOL said: View Post
    Just want a few thoughts on this one
    Samsung UE590 U28E590D 27" 28" LED LCD Gaming Monitor 1MS 4K UHD HDMI FreeSync
    I know it is a TN panel but at $400 down from close to a$1000 I thought it was a good buy.

    It's an updated version of my U28D590D. It includes an HDMI 2.0 port, so it can do 60 FPS at UHD over HDMI. (The U28E590D only does 60 FPS through its DisplayPort 1.2.) It also supports FreeSync. Like the U28D590D, it uses an 8 bit panel, but it supports 10 bit color using FRC (temporal dithering). (That's 30 bits altogether for RGB, or a billion colors.)

    $400 is pretty good, especially if those are Australian dollars.
      My ComputersSystem Spec

  6. ICIT2LOL's Avatar
    Posts : 1,132
    7 and 10 on various machines
    Thread Starter
       1 Week Ago #16

    Thanks Bobkn I might just give this one a go and yes that is Australain dollars and the RRP on it was originally $965 and I am assuming they are just trying to clear them because they are TN panels where most people are looking for IPS screens but the viewing angles that some make much of an issue of is not a problem for me as I sit in front of the monitor so viewing from the side like I said is not of any importance to me.
    Actually I have an older BenQ 24" as a spare and it is a TN panel and it never bothered me then plus the specs on my GPU state it can support up to 7680x4320 resolution so I might just give this one a try when my tax return comes back LOL!!
      My ComputerSystem Spec


 
Page 2 of 2 FirstFirst 12

Related Threads
My HP ProBook 450 G3 laptop with Windows 10 Pro has for some reason lost the drivers for the internal laptop display. When I go to Device Manager-Display, I can only see "Generic PnP Monitor". I have used the laptop for 2.5 years and think that this...
Hi all, I have been running a dual monitor setup on a Windows 10 PC and ever since a windows update a few weeks ago I have been having the following issue.. When I boot up the PC initially I see the same display on both screens, all perfectly...
Hi, I am using windows 10 pro with 3 monitors attached to a GTX770. 2xDell U2715H monitors (1440p) - work monitors 1xPhilips 1080p monitor - client monitor. Two monitors are used all the time for work in a dual monitor setup. The third...
I have just upgraded from win 7 ultimate to win 10 pro on my gaming computer. I have 3 monitors set to act as one wide desktop. Currently the Win 10 start menu positions to the far left of the left monitor. Is there a way to reposition it (in it's...
Hi, Just as the title says, I'm having a slight issue with my dual monitor setup. I regularly need to keep my computer on while not using it, so I usually turn both screens off when I do so. My problem occurs when I return and turn both...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:01.
Find Us